Mean Well IDLC-45A-700 vadovą

Mean Well IDLC-45A-700
7.5 · 1
PDF vadovas
 · 6 puslapiai
Anglų
vadovasMean Well IDLC-45A-700
Installation Manual
TypeLED Power Supply
FamiliesAP, CEN, CLG, ELG, ELN, GSC, HBG, HLG, HLN, HLP, HSG, HVG, LCM, LP, LPF, PLC, NPF, OWA, PCD,
PLC, PLD, PLM, PLN, PLP, PWM, ULP

Introduction

The LED power supply is a dedicated LED driving device that delivers a constant current/voltage or generates an
adjustable current controlled by an external dimmer to LEDs. Depending on its types or design concept, some of
them not only have PFC capability but also can be located in a harsh environment such as dusty, humid places.
Mean Well’s LED power supplies include metal case, plastic case, and PCB types.

Installation

1Before commencing any installation or maintenance work, please disconnect the power supply from the utility.
Ensure that it cannot be re-connected inadvertently!
2Keep proper ventilation around the unit and do not stack any object on it. Also a 10-15 cm clearance must be
kept when the adjacent device is a heat source.
3Mounting orientations other than standard orientation or operate under high ambient temperature may
increase the internal component temperature and will require a de-rating in output current. Please refer to
the specification sheet to receive the optimum mounting position and information about the de-rating curve.
4Current rating of an approved primary /secondary cable should be greater than or equal to that of the unit.
Please refer to its specification.
5For LED power supplies with waterproof connectors, verify that the linkage between the unit and the lighting
fixture is tight so that water cannot intrude into the system.
6For dimmable LED power supplies, make sure that your dimming controller is capable of driving
these units. For ELN series, either “D” or “Ptype, require 40mA each unit; for those with “3 in 1” dimming
function, e.g. HLG and LPF series, require 0.15mA each unit.
7Wiring: The wire color will vary by country, please refer to the table below.
North America
European Harmonized
Live and ACL
Black
Brown
Neutral and ACN
white
Blue
PE and FG (Class I only)
Green
Green/yellow
aConnect the FG wire (green or green/yellow) of the LED power supply to PE (green or green/yellow), this
step can be skipped when the unit is marked class II, ungrounded.
bConnect the ACL wire (black or brown) of the LED power supply to Live (black or brown).
cConnect the ACN wire (white or blue) of the LED power supply to Neutral (white or blue).

Vadovas

Peržiūrėkite vadovą Mean Well IDLC-45A-700 čia, nemokamai. Šis vadovas priskiriamas kategorijai Neklasifikuojama ir buvo įvertintas 1 žmonių, kurių vidurkis a 7.5. Šis vadovas pateikiamas šiomis kalbomis: Anglų. Ar turite klausimą apie Mean Well IDLC-45A-700 ar Jums reikia pagalbos? Užduokite savo klausimą čia

Reikia pagalbos?

Ar turite klausimų apie Mean Well IDLC-45A-700, kurio atsakymo vadove nera? Užduokite savo klausimą čia. Pateikite aiškų ir išsamų problemos ir savo klausimo aprašymą. Kuo geriau apibūdinsite savo problemą ir klausimą, tuo lengviau kiti Mean Well IDLC-45A-700 savininkai galės pateikti tinkamą atsakymą.

Klausimų skaičius: 0

Mean Well IDLC-45A-700 specifikacijos

Žemiau rasite Mean Well IDLC-45A-700 gaminio ir vadovo specifikacijas.

Bendra informacija
Prekės ženklas Mean Well
Modelis IDLC-45A-700
Produktas Neklasifikuojama
Kalba Anglų
Failo tipas Vartotojo vadovas (PDF)

Dažnai užduodami klausimai

Neradote atsakymo į savo klausimą vadove? Atsakymą į savo klausimą galite rasti žemiau esančiuose DUK apie Mean Well IDLC-45A-700.

Ar jūsų klausimas nėra įtrauktas į sąrašą? Užduokite savo klausimą čia

Jokių rezultatų